Posted:
Tuesday, 02 September 2025
Valid Thru:
Thursday, 02 October 2025
Index Requested on:
09/02/2025 19:32:39
Indexed on:
09/02/2025 19:32:39
Location: Oakland, OR, 97462, US
Industry:
Lumber & Wood
Occupational Category:
53-7032.00 - Transportation and Material Moving
Type of Employment: FULL_TIME
Swanson Group is hiring!
Description:
Position Title: Loader Operator
Reports To: Plant Manager
Department: Dean Resources Pellet Mill
Hours per shift: Employee works 12-hour shifts, with two 10-minute breaks, and 30-minute unpaid lunch.
Wage: Level 4 DOE
Position Purpose: Use a Cat 950 Front End Loader to mix sawdust and shavings and load them onto the dryer infeed chain, Perform moderate to light maintenance of the loader. The operator must be willing to be cross trained in other positions in the pellet mill.
Position Functions:
950 Loader Operator: Essential Functions* These duties are designated as ADA Essential Functions and must be performed in this job. |
Keeping the mill operating efficiently by feeding a steady supply of sawdust/shavings to the dryer infeed. Dump waste boxes. |
Daily fluid level and (preventive) maintenance check of loader. Routinely conduct visual maintenance inspection of front-end loader. Perform (preventive) maintenance per schedule (grease, oil, fuel). Report any discrepancies to supervisor. Keep the machine clean and blow out radiator and engine compartments |
Perform visual inspection of all incoming loads. |
Safely operate loader in a confined area. |
Communicate clearly on radio with crew members. |
Non-Essential Functions These duties are secondary in nature and are not classified as ADA essential. |
The worker may be required to rotate to different positions for cross training purposes or to facilitate production. Job duties for other positions are outlined in their individual job descriptions. Assist Co-Workers or maintenance personnel in basic maintenance and upkeep of machine. |
Working Environment: (1) Inside 90%, average temperature 70 degrees F (2) Outside 10%; extreme low temperature 10 degrees F, extreme high temperature 105 degrees F. Noise or vibration: Machine noise to include machine being operated as well as other machines close by including Front end loader and forklift. Hazards: See Job Hazard Analysis. (3) Atmospheric conditions: Fumes: Wood, Dust: Limited, Mist: Water, Odors: Wood particle, Gasses: None, Poor Ventilation: None
Personal Protective Equipment Required: (1) Eye Protection. (2) Hearing Protection. (3) Blue Atlas gloves. (4) Approved Footwear (5) High Visibility Clothing.
Physical Demands: See the attached Job/Task Evaluation and Physical Capabilities portion; this position requires constant use of hearing and vision, frequent pushing/pulling and reaching, and occasional lifting/carrying/ more than 50 lbs.
Skills: Use vision/hearing continuously. Reading and speech required to communicate comprehension of Job Hazard Analysis, machine specific lockout procedures, monthly safety training, etc. Worker generally works alone with little supervision. Must be self-directed in identifying and efficiently completing each task. Ability to prioritize, organize and make necessary decisions.
Safety: (1) Do only maintenance you are trained to do and keep all body parts out of machinery. (2) Always use our 14-step lockout/tagout procedure before doing any maintenance, clearing jams, or getting into machinery for any reason; be aware of stored energy. (3) Always use proper body mechanics (ex: don’t overreach, get help as needed to push loads out). (4) Use proper PPE (gloves, eye protection, hearing protection). (5) Be aware of and always communicate with your co-worker (ex: forklift driver). (6) Will be required to read and write during safety training.
Responsibilities:
Please review the job description.
Educational requirements:
Desired Skills:
Please see the job description for required or recommended skills.
Benefits:
Please see the job description for benefits.